Clutch Bell Housing

Product:  Advance Adapters Conversion Chevy Bellhousing – 712566

Description: Advance Adapters Conversion Chevy Bellhousing – 712566: BA10/5 Peugeot transmissions are a light-duty transmission and should only be used with V8 conversions under normal driving conditions (not recommended for high torque applications). Please consider your driving habits and your vehicles intent before proceeding with the conversion. The Advance Adapter bellhousing is compatible with all Chevy engines (V6/V8) when using stock BA10/5 transmission. This bellhousing is designed for exclusive use with 153 tooth flywheel applications. Kit includes: bellhousing, pilot busing, release bearing and fasteners. This kit will also require the use of a 10-1/2 pressure plate and a 10-1/2 x 1-1/8 10 spline clutch disc.

SKU:  ADV712566

Manufacture:  Advance Adapters

Manufacture Part Number: 712566

Keywords: truck parts truck accessories Advance Adapters, Clutch & Bellhousing Components, ADV712566

Product:  Advance Adapters GM V8 Bellhousing for GM NV4550 – 712576

Description: Advance Adapters GM V8 Bellhousing for GM NV4550 – 712576: GM bellhousing for 1996-up GM with NV4550 with 5.125 index diameter. Bellhousing has stock GM bolt pattern and is 6 and 5/16 deep. Kit includes- one adapter bellhousing, one dust cover plate, one modified bearing retainer, one special pilot bearing, one clutch release arm, one ball pivot (installed), one clutch arm boot, and additional mounting hardware. Also includes instructions.

SKU:  ADV712576

Manufacture:  Advance Adapters

Manufacture Part Number: 712576

Keywords: truck parts truck accessories Advance Adapters, Clutch & Bellhousing Components, ADV712576

Product:  Advance Adapters NV3550 To GM V8 Engine – 712591

Description: Advance Adapters NV3550 To GM V8 Engine – 712591: 6 cylinder engine and factory NV3550 This transmission was used in TJ Wranglers equipped with the 4.0L 6 cylinder engines. This bellhousing requires the use of a 153-tooth flywheel and a new external mounted slave cylinder. Input shaft on this trans is a 1-1/8 10 spline with a pilot tip diameter of .750.

SKU:  ADV712591

Manufacture:  Advance Adapters

Manufacture Part Number: 712591

Keywords: truck parts truck accessories Advance Adapters, Clutch & Bellhousing Components, ADV712591

Product:  Advance Adapters Conversion Bellhousing – 712565

Description: Advance Adapters Conversion Bellhousing – 712565: AX5 Transmission to Chevy small block Found in 1988-2002 Wranglers with the 4 cylinder engine. This bellhousing requires the use of a 153-tooth flywheel and a new external mounted slave cylinder and required is a special 10-1/2 x 1 14 spline clutch disc. Also check out our conversion clutch components, conversion radiators and In Frame Header Chevy V8 – TJ Wrangler.

SKU:  ADV712565

Manufacture:  Advance Adapters

Manufacture Part Number: 712565

Keywords: truck parts truck accessories Advance Adapters, Clutch & Bellhousing Components, ADV712565

Product:  Advance Adapters Conversion Bellhousing – 712567

Description: Advance Adapters Conversion Bellhousing – 712567: Chevy V6 or V8 engines;AX-15 This kit is designed to fit the GM block with a 153T flywheel. This adapter bellhousing assembly is used to adapt the GM 4.3, V8 to the Jeep AX15, 5 speed manual transmissions. The bellhousing kit includes a 356 T-6 aluminum bellhousing, universal dust cover plate, pilot bushing, AX15 bearing retainer assembly, seal, throw-out arm, slave cylinder push rod, slave cylinder push rod end, ball pivot, fastening hardware, and adapter instructions. Note: When using a 168th flywheel use kit 712567V Note: GM 4.3 V6 conversion applications with a 168th flywheel will experience header interference with the slave cylinder & throw-out arm. At that time, it is recommended that a muffler shop custom make an exhaust down pipe. Transmission: The AX15 was used in model years 1989-99. It has a overall transmission case length of 24.00 inch. The output shaft has a positive stick out and is 23 spline. The AX15 was found coupled to the Jeep 4.0L. Through out the years we have seen two different input pilot tip dimensions. 1989-95 used a .590 inch diameter. 1997-99 used a .750 inch diameter. Required Clutch Options: P/N 716213 Slave Cylinder P/N 383271 10.5 inch Clutch Disc P/N N1430 Throw-Out Bearing P/N CF360056 10.5 inch Pressure Plate

SKU:  ADV712567

Manufacture:  Advance Adapters

Manufacture Part Number: 712567

Keywords: truck parts truck accessories Advance Adapters, Clutch & Bellhousing Components, ADV712567